P12x/EN T/Eb6 - Schneider - error

P12x/EN CT/Eb6MODBUS DatabasePage 48CommunicationsMiCOM P120/P121/P122/P123CODEDESCRIPTIONF20a Logical data status Part 1/2bit 0: Selective scheme logic 1bit 1: Selective scheme logic 2bit 2: Relay delatchbit 3: CB position (52 a)bit 4: CB position (52 b)bit 5: Lack of SF6bit 6: External Aux1bit 7: External Aux2bit 8: Blocking logic 1bit 9: Blocking logic 2bit 10: Disturbance record startbit 11: Cold load startbit 12: Setting group changebit 13: Recloser lockedbit 14: Thermal state resetbit 15: Trip circuit supervisionF20b Logical data status Part 2/2F21F22F23F24F25bit 0: CB Failure by external signalisationbit 1: LEDs alarms resetbit 2: Maintenance modebit 3: External Aux3bit 4: External Aux4bit 5: Manual Close (SOFT/TOR) --> New name = "SOTF"bit 6: Local Modebit 7: Synchronisationbit 8: Control Tripbit 9: Control Closebit 10: External Aux5Unsigned integer: software version10: Version 1.A11: Version 1.B20: Version 2.AUnsigned integer: Trip statusbit 0: Trip output relay RL1 latchedbit 1: Memorization of trip informationbit 2 to bit 15: freeUnsigned integer: relay statusbit 0: Relay statusbit 1: Minor material alarmbit 2: Presence of non-acknowledged eventbit 3: Synchronisation statebit 4: Presence of non-acknowledged disturbance recordbit 5: Presence of non-acknowledged fault recordbit 6: reservedbit 7: reservedStatus of the relay functions0: Disabled1: Enabled2 ASCII characters