13.07.2015 Views

P12x/EN T/Eb6 - Schneider - error

P12x/EN T/Eb6 - Schneider - error

P12x/EN T/Eb6 - Schneider - error

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Hardware/Software Version<strong>P12x</strong>/<strong>EN</strong> VC/<strong>Eb6</strong>History and CompatibilityMiCOM P120/P121/P122/P123 Page 17/34Relay Type P122SoftwareVersionDate ofIssueFull Description of ChangesV6.C 28/11/03 Software changes implemented in this version- Addition of function SOFT/TOR: Function allowingsend a tripping order without awaitingtemporization of release, addition of manual logicalinput closed (order of manual closing).- Addition of function LOCAL/REMOTE by wiring:addition of logical input LOCAL MODE (modeswitch-over local, for inhibition of the writing ordersthe communication), and addition of exitsCONTROL TRIP (remote control of release) andCLOSED CONTROL operate by remote controltrip).- Modif. treatment of the thermal model: 20milliseconds instead of 100.- Evolutions communication MODBUS: addition ofthe read quick byte (Function 7) by reading ofwords (Function 03 or 04), and of the reading ofthe date (on page 8).- Communication MODBUS Front Face: addition ofthe filtering of address.Software improvement done in this versionFix on RI curves processing in certain cases.V6.D 11/12/03 Software improvement done in this versionModification to remove the taking into account of thenumber of defect in the calculation of checksum ofpage 1 of E2PROM, like in autotest E2PROM.S1CompatibilityBackwardCompatibilitywith previoushardwareV2.10 Two versionsHARD 3 orHARD 4(HARD 2 → *)V2.10 Two versionsHARD 3 orHARD 4V6.E 07/06/04 Software changes implemented in this versionModified recloser function: modified taking in accountof manual reclose while blocking by recloser externalinput.Added a new DNP3 function: fault data can beaccessed as analog inputs.DNP3 modifications: Binary inputs move to Class 0.Acceptance of variation 2 object 1.Modified German texts for Front panel.Software improvement done in this versionModification to fix upload program for FPGA of newCPU board (index E or higher).Improvement on 3 rd threshold delay Ie>>>, whoselimitation test was done on 1 st threshold delay Ie>.Improved SOFT/TOR function.Improved Breaker Fail alarm processingFixed checksum verification test in Front panelMODBUS communication.(HARD 2 → *)V2.10 Two versionsHARD 3 orHARD 4(HARD 2 → *)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!