P12x/EN T/Eb6 - Schneider - error

Hardware/Software VersionP12x/EN VC/Eb6History and CompatibilityMiCOM P120/P121/P122/P123 Page 25/34Relay Type P123SoftwareVersionDate ofIssueFull Description of ChangesV5.A 27/09/01 Maintenance mode for manual command of theoutput relaysReset of leds by logic input or control command orfront panel or on new fault appearanceV5.C 04/10/01 VDEW improvements(Updating of the information SCN into the END OFGENERAL INTERROGATION ASDU)V5.D 30/01/02 Addition of order COM1/COM2/COM3/COM4assignalble on the auxiliary relays.Addition of the logic inputs AUX3 and AUX 4 do notgenerating alarm message.Improvement of english labelV5.F 08/08/02 EA approval option: logical input filtering on 24samples instead of 12 either 15 ms at 50 Hz)Improvment of the Recording of rolling demand inram saved. The previous version could lead to anuntimely ram saved error message due to themanagement of this recordingCourier improvment: adding of the cell 0010 (CBcontrol) protected by passwordCorrection of the configuration of taux3 and taux4 forMODBUSIEC103: correction of the checksum calculation forshort message. Correction of the I0 channel data intothe disturbance recordV5.G 24/10/02 Added Private messages option option (for nonstandard protection functions) in IEC870-5-103communicationS1Compatibility≥V2.0≥V2.0≥V2.0≥V2.0BackwardCompatibilitywith previoushardwareHARD V4HARD V4V2.07 Two versionsHARD 3 orHARD 4(HARD 2 → *)