P12x/EN T/Eb6 - Schneider - error

P12x/EN CT/Eb6MODBUS DatabasePage 50CommunicationsMiCOM P120/P121/P122/P123CODEDESCRIPTIONF36a Memorised flags of non acknowledged alarms Part 1/3bit 0: IE>bit 1: tIE>bit 2: IE>>bit 3: tIE>>bit 4: IE>>>bit 5: tIE>>>bit 6: Thermal overload alarmbit 7: Thermal overload tripbit 8: Broken conductorbit 9: CB failurebit 10: I2>>bit 11: I2>bit 12: tI2>bit 13: tAux 1bit 14: tAux 2bit 15: tI2>>F36b Memorised flags of non acknowledged alarms Part 3/3F37Bit 0: t Boolean Equation ABit 1: t Boolean Equation BBit 2: t Boolean Equation CBit 3: t Boolean Equation DBit 4: t Boolean Equation EBit 5: t Boolean Equation FBit 6: t Boolean Equation GBit 7: t Boolean Equation HThermal overload informationbit 0: Thermal overload alarmbit 1: Thermal overload tripF38 Output information part 1/2F39bit 0: reservedbit 1: CB failurebit 2: Pole A openingbit 3: Pole B openingbit 4: Pole C openingbit 5: Broken conductorbit 6: tAux 1bit 7: tAux 2bit 8: Broken conductor time delaybit 9: CB failure time delaybit 10: “Cold load pick up” temporization startedbit 11: CB alarms or bits 0,1,2,4 of F43bit 12: tAux 3bit 13: tAux 4bit 14: Inrush blockingbit 15: tAux 5Output relays commandbit 0: RL1 (trip)bit 1: RL2bit 2: RL3bit 3: RL0 (watch-dog)bit 4: RL4bit 5: RL5bit 6: RL6bit 7: RL7bit 8: RL8