P12x/EN T/Eb6 - Schneider - error

P12x/EN FT/Eb6Page 48/62User GuideMiCOM P120/P121/P122/P123Label P120 P121 P122 P123 FunctionMaint. Mode X X Maintenance Mode ON/OFF changeSOTF X Switch on to fault (SOTF) logical input.Local Mode X Local mode condition (if activated,any remotecommand to the output relays is forbidden)Synchro X X Assign a Time synchronisation inputCtrl Trip X X Assign a control trip function to the input.When activated, it is possible to order outputrelay(s) affected to the control trip function(P122: RL1 only, P123: RL1 to RL8).Ctrl Close X X Assign a control close function to the input.When activated, it is possible to order outputrelays affected to the CB Close (P122) orcontrol close (P123) function. For P123, thisinput can be started by the SOTF feature.NOTE: For P120:The external information Aux1 and Aux2 is used only for signalisationon the communication network.T Aux1 and t Aux2 are fixed and equal to 0 ms.Only one blocking logic function.AUTOMAT.CTRL Inputs … Input 1 Input 2 ... Input 4 Aux Times2.9.8.1 Function assignement to a logic inputAUTOMAT. CTRLInputsHeading of the Inputs sub-menu.Input 1Input 2Input 3Input 4Aux1 Timet Aux1Aux2 Timet Aux252a52bAux1Log Sel 110s10sAssigning label 52a to logic input 1.See the previous table for input choices.Assigning label 52b to logic input 2.See the previous table for input choices.Assigning label Aux1 to logic input 3.See the previous table for input choices.Assigning label Log Sel 1 to logic input 4.See the previous table for input choices.Displays setting value of timer assigned to logic inputAux1, from 0ms to 200s (steps of 10ms).As above for Aux2.