P12x/EN T/Eb6 - Schneider - error

P12x/EN VC/Eb6Page 30/34Hardware/Software VersionHistory and CompatibilityMiCOM P120/P121/P122/P123Relay Type P123SoftwareVersionDate ofIssueFull Description of ChangesV11.A 11/06/07 Software changes implemented in this versionV11.CInrush blocking function implementationCalibration value memorization.Auxiliary logic inputs temporized, with alarm displayed ornot (by setting), assignable to LED, to Trip order, tooutput relays or to logic equations.RL1 & RL2 can be configured as Fail safePossibility to have contact outputs inverted to trip on dropof signalsTime Synchronization through a digital InputTMS step to 0.001 of the TMS as well as the RTMS. Thatwill authorize a better precision for the small values.Logic inputs assignable to one or several internal signal.Each signal result of a logical OR of all inputs assignedto it.Digital inputs can be directly assigned to outputs.Increase the number of fault records from 5 to 25.Increase the number of event records from 75 to 250.Correction of disturbance record in case of avalancheEvent record time tagging correctionCommunication protocol enhancement (Modbus, DNP3& Courier)Autorecloser modification to take into account thedefinitive trip informationSoftware changes implemented in this version- software minor corrections.S1CompatibilityBackwardCompatibilitywith previoushardwareV2.14 HARD 5V2.14 HARD 5V11.DSoftware changes implemented in this version- Portuguese language is added.- Correction for communication with system (Pacis…)- DMT temporization decimal value corrected for values>20s- recloser: information of definitive trip occurs if thematrix of cycle does not set “nb cycle”+1.- Communication Modbus correction:. manual, self and disturbance acknowledgment of theoldest event & fault record,. Modbus address added to the event setting groupchange,- Communication Modbus of disturbance record:number of pages and samples in the last page in theservice name corrected,- “Disturbance trigger” added in the event record.V2.14 HARD 5