P12x/EN T/Eb6 - Schneider - error

User GuideP12x/EN FT/Eb6MiCOM P120/P121/P122/P123 Page 29/62a) Delay type = Definite Minimum TimeDelay TypetIe >t ResetDMT100 ms0 ms“DMT” is selectedSets the time delay associated with Ie>. The settingrange is from 0 to 150.0 s (step 10 ms).P122 and P123 only,Sets the reset time value from 0 to 600 s (step 10 ms)b) Delay type = Inverse Definite Minimum TimeDelay TypeIdmtTmsIDMTIEC SI0,025Reset Delay TypeDMTRtmst ResetIe> >> >>>Interlock0.0250 msYes“IDMT” is selectedSelects the type of curve. Select choice from:- IEC SI, IEC STI, IEC VI, IEC EI, IEC LTI (IEC curve),- ICO2, IEEE MI, CO8, IEEE VI, IEEE EI (EEE/ANSIcurve), BPN EDF.Sets the Time Multiplier Setting (TMS) value for thecurve from 0.025 to 1.500 (step 0.001)P122 and P123 only, if “Idmt” = IEEE/ANSI curve isselected.Selects the reset delay time type. Select between DMT(Definitive Time) and IDMT (Inverse Time).P122 and P123 only, if “Reset Delay Type” = IDMT isselected.Sets the Reverse Time Multiplier Setting (RTMS) valueassociated with the IDMT reset time choice from 0.025 to1.5 (step 0.001)P122 and P123 only,Sets the reset time value from 0 to 600 s (step 10 ms)Interlock of first threshold by the second and thirdthresholds, but only if first threshold trip is set to IDMT (ifIe>> or Ie>>> activated, Ie> submenu only).Setting choice: No, Yesc) Delay type = RI - electromechanical inverse time curveDelay TypeKt ResetRI2.50060 msDisplay of the I> inverse time delay (electromechanicalRI curve).Selects the RI curve K value from 0.100 to 10 (step0.100)P122 and P123 only,Sets the reset time value from 0 to 600 s (step 10 ms)d) Delay type = RXIDG for Netmanagements curves (P122 and P123, cortec B only)Delay typeKt ResetRXIDG0.360 msDisplays the Ie> inverse time delay (RXIDG curve).Set the value for the coefficient k associated to theRXIDG curve. The setting range is from 0.3 to 1 (step0.1).Set the value for the time reset from 0 to 600 s.