P12x/EN T/Eb6 - Schneider - error

P12x/EN FT/Eb6Page 56/62User GuideMiCOM P120/P121/P122/P1232.10 RECORDS Menu (P120, P122 and P123 only)Through the RECORDS menu, stored data, events, disturbances and monitoring informationcan be displayed and read.The different submenus are: RECORDS (1)CB Fault Record Instantaneous DisturbMonitoring Record Time Peak (1)Value(1) P122 and P123 only Rolling (1)Demand2.10.1 CB MONITORING submenu (P122, P123 only)Through the CB Monitoring submenu, it is possible to read and clear counter valuesassociated with the circuit breaker.RECORDNOTE:The following counters may be reset to zero, for example, following amaintenance inspection and overhaul.Heading the RECORD menu.CB MonitoringHeading the CB Monitoring submenu.CB Opening Time95 msCB Closing Time115 msCB OperationsRST = [C] 5489Σ Amps (n)RST = [C]Σ Amps (n) IAΣ Amps (n) IBΣ Amps (n) IC4 E42 E48 E3Displays the circuit breaker opening time (ms),measured between the trip command (Trip output relay)and the change of position of O/O (52a).Displays the circuit breaker closing time (ms), measuredbetween the closing command (output auxiliary relay)and the change of position of O/O (52a).Displays the number of opening commands executed bythe circuit breaker. To clear these values, press .Displays the summation of the current (in Amps orsquare Amps) interrupted by the CB. Stored currentvalues for all 3 phases are cleared together. To clearthese values, press .Displays the summation value of the current (in Amps orsquare Amps) for phase A interrupted by the circuitbreaker.As above for phase B.As above for phase C.