P12x/EN T/Eb6 - Schneider - error

P12x/EN VC/Eb6Page 6/34Hardware/Software VersionHistory and CompatibilityMiCOM P120/P121/P122/P123Relay Type P120SoftwareVersionDate ofIssueFull Description of ChangesV11.A 11/06/07 Software changes implemented in this versionV11.CCalibration value memorization.Auxiliary logic inputs temporized, with alarm displayedor not (by setting), assignable to LED, to Trip order, tooutput relays or to logic equations.RL1 & RL2 can be configured as Fail safePossibility to have contact outputs inverted to trip ondrop of signalsTime Synchronization through a digital InputTMS step to 0.001 of the TMS as well as the RTMS.That will authorize a better precision for the smallvalues.Logic inputs assignable to one or several internal signal.Each signal result of a logical OR of all inputs assignedto it.Digital inputs can be directly assigned to outputs.Increase the number of fault records from 5 to 25.Increase the number of event records from 75 to 250.Correction of disturbance record in case of avalancheEvent record time tagging correctionCommunication protocol enhancement (Modbus, DNP3& Courier)Software changes implemented in this version- tAux1 and tAux2 modifications:. assigned to inputs,. temporization,. alarm inhibited,. Trip,. latching,. blocking logic,. assigned to outputs.- IEC-103 and Courier: correction of the acknowledgementof the disturbance record.- Modbus:. correction of the manual, self and disturbance recordacknowledgement,. address added to the event setting group change,. disturbance record: correction of the number of pagesand sample in the last page,. hardware alarm after a communication failure,- correction of LSB of square root.BackwardS1CompatibilityCompatibilitywith previoushardwareV2.14 HARD 5V2.14 HARD 5V11.D 2011 New Schneider Electric brand S1StudioHard 5