P12x/EN T/Eb6 - Schneider - error

P12x/EN CT/Eb6DNP 3.0 DatabasePage 12CommunicationsMiCOM P120/P121/P122/P1231.4.3 CountersThe following table lists both Binary Counters (Object 20) and Frozen Counters (Object 21).When a freeze function is performed on a Binary Counter point, the frozen value is availablein the corresponding Frozen Counter point.Binary Counters and Frozen Counters are not included in class 0 polls.P120 and P121 do not support binary Counters and Frozen Counters.Binary CountersStatic (Steady-State) Object Number: 20Change Event Object Number: not supportedRequest Function Codes supported: 1 (read), 7 (freeze), 8 (freeze noack)9 (freeze and clear), 10 (freeze and clear, noack)Static Variation reported when variation 0 requested: 5 (32-Bit Binary Counter without FlagChange Event Variation reported when variation 0 requested: none-not supportedFrozen CountersStatic (Steady-State) Object Number: 21Change Event Object Number: not supportedRequest Function Codes supported: 1 (read)Static Variation reported when variation 0 requested: 9 (32-Bit Frozen Binary without Flag)Change Event Variation reported when variation 0 requested: none-not supportedP122PointIndexP123PointIndexName/DescriptionData type0 0 Max RMS current phase A D11 1 Max RMS current phase B D12 2 Max RMS current phase C D13 3 Average RMS current phase A D14 4 Average RMS current phase B D15 5 Average RMS current phase C D16 6 CB operation number D27 7 sa2n ia D38 8 sa2n ib D39 9 sa2n ic D310 Total number of autoreclosure cycle D211 Number of cycles 1 D212 Number of cycles 2 D213 Number of cycles 3 D214 Number of cycles 4 D215 Definitive Tripping number D216 Number of closing order D210 17 Rolling demand(average) RMS phase A D111 18 Rolling demand(average) RMS phase B D112 19 Rolling demand(average) RMS phase C D113 20 Maximum RMS phase A (after a new initialization) D114 21 Maximum RMS phase B (after a new initialization) D115 22 Maximum RMS phase C (after a new initialization) D1