P12x/EN T/Eb6 - Schneider - error

P12x/EN CT/Eb6DNP 3.0 DatabasePage 4CommunicationsMiCOM P120/P121/P122/P123DNP V3.00DEVICE PROFILE DOCUMENT(ALSO SEE THE IMPLEMENTATION TABLE IN SECTION 1.3, BEGINNING ON PAGE 6).Requires Data Link Layer Confirmation: NeverAlwaysSometimesConfigurableRequires Application Layer Confirmation:NeverAlways When reporting Event Data When sending multi-fragment responsesSometimesConfigurableTimeouts while waiting for:Data Link Confirm: None Fixed at 100 ms Variable Configurable.Complete Appl. Fragment: None Fixed at ____ Variable ConfigurableApplication Confirm: None Fixed at 1s Variable ConfigurableComplete Appl. Response: None Fixed at ____ Variable ConfigurableOthers:Binary input change scanning period: 5msAnalog input change scanning period: 1sSends/Executes Control Operations:WRITE Binary Outputs Never Always Sometimes ConfigurableSELECT/OPERATE Never Always Sometimes ConfigurableDIRECT OPERATE Never Always Sometimes ConfigurableDIRECT OPERATE – NO ACK Never Always Sometimes ConfigurableCount > 1 Never Always Sometimes ConfigurablePulse On Never Always Sometimes ConfigurablePulse Off Never Always Sometimes ConfigurableLatch On Never Always Sometimes ConfigurableLatch Off Never Always Sometimes ConfigurableQueue Never Always Sometimes ConfigurableClear Queue Never Always Sometimes ConfigurableReports Binary Input Change Events whenno specific variation requested:Reports time-tagged Binary Input Change Eventswhen no specific variation requested:Never Only time-tagged for P122 andP123 Only non-time-tagged for P121ConfigurableSends Unsolicited Responses: NeverConfigurableOnly certain objectsSometimes (attach explanation)ENABLE/DISABLE UNSOLICITEDFunction codes supported Never for P121 Binary Input Change With Time forP122 and P123Binary Input Change With Relative TimeConfigurable (attach explanation)Sends Static Data in Unsolicited Responses: NeverWhen Device RestartsWhen Status Flags ChangeNo other options are permitted.