Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)
Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)
Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
System ManagementSSH PortSSH SessionsEnter the port number for Secure Shell port for CLI interface. By default, the port number is22.Enter the number of SSH sessions. By default, it is 1 session.NOTE: Total number of CLI sessions allowed is 3, so the sum of Telnet and SSHsessions cannot be more than 3. For example, if you configure the numberof Telnet sessions as 2, then the number of SSH sessions can only be avalue from 0 to 1.5.3.3 SNMPFigure 5-13 SNMPThe parameters for SNMP are described in the following table.SNMP Parameter settingsSNMPVersionThis parameter provides the access control for the SNMP interface. Select Enable/Disableto enable or disable the SNMP access to the device from any host. Disabling the SNMP willaffect the NMS/PVES access to the device.This parameter configures the SNMP version. The available versions are v1-v2 and v3. Bydefault, the SNMP starts in version v2c.On selecting SNMP v1-v2c, the following parameters need to be configured. Please refer tothe Tsunami <strong>QB</strong>-<strong>8100</strong> Reference Manual for SNMPv1-v2c Configuration.Tsunami <strong>QB</strong>-<strong>8100</strong> <strong>Series</strong> (<strong>50</strong> <strong>Mbps</strong> / <strong>12</strong> <strong>Mbps</strong>) Installation and Management Guide <strong>12</strong>0
Change language