Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

System ManagementParameterDescriptionHost Port Represents the host port number. Default port is 514.NOTE: The user must configure the correct port number on which the syslog serveris running for the Host Port parameter. Choice of port number must be inline with the standards for port number assignments defined by InternetAssigned Numbers Authority (IANA).CommentUsed to provide a note for the device administrator.5.4 SNTPSNTP allows a network entity to communicate with time servers in the network/Internet to retrieve and synchronize the timeof day information. When this feature is enabled, the system attempts to retrieve the time of day information from theconfigured time servers (primary or secondary); and when successful, it updates the relevant time objects in the system.Figure 5-18 SNTPTo configure and view parameters within the SNTP screen1. Click MANAGEMENT > SNTP.2. Select the Enable SNTP Status checkbox. The selected status determines which of the parameters on the SNTP pageare configurable.3. Enter the parameters listed the following table.4. Click OK.5. Click COMMIT for the changes to take effect.ParameterPrimary Server IPAddress/DomainNameSecondary Server IPAddress/DomainNameTime ZoneDescriptionSpecifies the host name or the IP address of the primary SNTP server. Either a domain nameor an IP address can be provided.This optional parameter specifies the host name or an IP address of the secondary SNTPserver.This parameter specifies the time zone set for the SNTP.Tsunami QB-8100 Series (50 Mbps / 12 Mbps) Installation and Management Guide 124