Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

Advanced ConfigurationAdding a New Service Flow (SFC):a. Click Add to add new entry. The following screen appears for configuring the New PIR Entry.Figure 4-36 QoS Service Flow Add Entry2. Specify details for the Service Flow Name, Scheduler Type, Traffic Direction, MIR, CIR, Max Latency, Tolerable Jitter,Traffic Priority, Max Messages in Burst and Entry Status.3. Click Add.ParameterService Flow NameScheduler TypeTraffic DirectionMIR (MaximumInformation Rate)CIR (CommittedInformation Rate)Max LatencyTolerable JitterTraffic PriorityMax Messages inBurstDescriptionSpecifies the Name of the Service Flow. It can be of length 1-32 characters.Specifies the Scheduler methods to be used. Scheduler type supports BE (Best Effort), RTPS(Real-Time Polling Service).Specifies the Direction (Downlink or Uplink) of the traffic in which the configuration has tobe matched.Specifies the maximum bandwidth allowed for this Service Flow. This value ranges from 88to maximum value specified in the license file.Specifies the reserved bandwidth allowed for this Service Flow. This value ranges from 0 tomaximum value specified in the license file.Specifies the Latency value. This value ranges from 5 to 100 ms.Specifies the Jitter value. This value ranges from 0 to 100 ms.Specifies the priority of the Service flow when multiple Service flows are assigned to singleQoS Class. This value ranges from 0 to 7.Specifies the maximum number of messages that can be sent in a burst. This value rangesfrom 1 to 16.NOTE: Reducing the number of messages impacts the throughput.Entry StatusSpecifies the Service Flow status.Tsunami QB-8100 Series (50 Mbps / 12 Mbps) Installation and Management Guide 75