Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

Advanced ConfigurationResult: When a logical “AND” is performed on the Wireless MAC Address and Wireless Mask, the result corresponds to anyMAC address beginning with the 00:20:2D prefix. Since Wireless Client 1 and Wireless Client 2 share the same prefix(00:02:2D), traffic between the Wired Server and Wireless Clients 1 and 2 is blocked. Wireless Client 3 can still communicatewith the Wired Server since it has a different prefix (00:20:A6).4.8.2.3 Prevent All Wireless Devices From Communicating With a Single Wired DeviceConfigure the following settings to prevent Wired Server from communicating with all three Wireless Clients:• Wired MAC Address: 00:40:F4:1C:DB:6A• Wired Mask: FF:FF:FF:FF:FF:FF• Wireless MAC Address: 00:00:00:00:00:00• Wireless Mask: 00:00:00:00:00:00Result: The unit blocks all traffic between the Wired Server and all wireless clients.4.8.2.4 Prevent a Wireless Device from Communicating with the Wired NetworkConfigure the following settings to prevent Wireless Client 3 from communicating with any device on the Ethernet:• Wired MAC Address: 00:00:00:00:00:00• Wired Mask: 00:00:00:00:00:00• Wireless MAC Address: 00:20:A6:12:4E:38• Wireless Mask: FF:FF:FF:FF:FF:FFResult: The unit blocks all traffic between Wireless Client 3 and the Ethernet network.4.8.2.5 Static MAC Address Filter ConfigurationTo configuring Static MAC Filter1. Click ADVANCED CONFIGURATION > Filtering > Static Mac Address Filter. The Static MAC Address Filterscreen is displayed as shown below.Figure 4-53 Static MAC Address Filter2. Click Add. The Static MAC Address Filter Add Row screen appears.Tsunami QB-8100 Series (50 Mbps / 12 Mbps) Installation and Management Guide 92