Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

Technical SpecificationsCategorySpecificationPower over Ethernet Injector • Input : 100 – 240 V AC (47 – 63 Hz)• Output : 48 V-DC at 0.40 A (19 Watts)• Pin-out : +48 V on pins 4/5, -48 V on pins 7/8• Size : 5.24 x 2.13 x 1.42 inches (133 x 54 x 36mm)• Weight : 7 ounces (200 g)• Temp : 0 to 40 ºCLEDsCategorySpecificationTypesPowerRadio ActivityEthernet ActivityRJ-11 detectionSoftware FeaturesCategorySpecificationKey Features • WORP protocol• Transmit Power Control• Integrity Check for Software Upload• IEEE 802.16e based QoS Support; up to 8classes of service, up to 8 service flows perclass (End Point A only)• Satellite Density• Enhanced Frequency Selection• Large Frame Support• IGMP SnoopingBridging and Routing • Bridge (802.1d)• IP/ RIPv1 (RFC 1058)• IP/ RIPv2 (RFC 1388)• CIDR (RFC 1519)• ICMP (RFC 792)• IP (RFC 791)• ARP (RFC 826)Filtering • Ethernet protocol (Ethertype)• Static MAC• IP address• Broadcast protocol• Worp Intra Cell BlockingTsunami QB-8100 Series (50 Mbps / 12 Mbps) Installation and Management Guide 180