Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

Installation and InitializationFigure 2-12 Commit StatusIf the configured parameters requires reboot, on committing the following screen appears.2.5.3 REBOOTFigure 2-13 Commit Status with Reboot MessageReboot operation is required for any change in the key parameters to take effect. For example, settings such as configuringthe Radio Mode, IP Address, and Network Mode need reboot to take effect.It is recommended that the device must be rebooted immediately after modifying a rebootable parameter. On clickingREBOOT, system displays a confirmation window as shown below.Figure 2-14 RebootTsunami QB-8100 Series (50 Mbps / 12 Mbps) Installation and Management Guide 26