13.07.2015 Views

Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Advanced Configuration• PIR Rule Name: Management Station SRC IP• PIR Priority: 63• Entry Status: Enableh. Return to the Class List screen and repeat steps 2 - 7 for the UL-Management Service Flow in this class.4.7 VLAN Configuration (Bridge Mode only)Virtual Local Area Networks (VLANs) are logical groupings of network hosts. Defined by software settings, other VLANmembers or resources appear (to connected hosts) to be on the same physical segment, no matter where they are attachedon the logical LAN or WAN segment. They simplify traffic flow between clients and their frequently-used or restrictedresources.A device can communicate across a VLAN-capable switch that analyses VLAN tagged frames and directs traffic to theappropriate units. The purpose of this network is to provide an easy way of modifying logical groups in the dynamicenvironment. VLAN is supported only in Bridge mode.VLANs are used to conveniently, efficiently, and easily manage your network in the following ways:• Define groups• Reduce broadcast and multicast traffic to unnecessary destinations– Improve network performance and reduce latency• Increase security– Secure network restricts members to resources on their own VLANVLAN features can be managed via:• The End Point’s Web interface• The Command Line Interface (see “Command Line Interface” section in the Reference Manual)• SNMP (Log on to Proxim support site http://support.proxim.com for MIBs)NOTE: The VLAN parameters can be configured on selected Interface (Ethernet 1/Ethernet 2).4.7.1 Establishing a VLAN ConnectionFor enabling the VLAN support, certain network settings should be configured and certain network resources, such as VLANaware switches should be available, depending upon the type of configuration.VLAN support also provides the capability to specify a separate VLAN ID and priority for management frames (SNMP, ICMP,Telnet, DHCP, and TFTP).To configure VLAN,Click ADVANCED CONFIGURATION > VLAN.Figure 4-45 Configuring VLANTsunami <strong>QB</strong>-<strong>8100</strong> <strong>Series</strong> (<strong>50</strong> <strong>Mbps</strong> / <strong>12</strong> <strong>Mbps</strong>) Installation and Management Guide 83

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!