Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

Installation and Initialization2This chapter contains information on how to install and mount the device. For a quick reference on how to install and mountthe device, refer to Tsunami QB-8100 Series Quick Installation Guide.This chapter covers the following topics:• Hardware Overview• Product Package• Installation Procedure– Step 1: Plan for Installation– Step 2: Choose a Location– Step 3: Gather Required Tools– Step 4: Unpack the Product Package– Step 5: Assemble the Cable– Step 6: Mount the Device– Step 7: Plug in the Cables– Step 8: Ground the Unit– Step 9: Power on the Device– Step 10: View LEDs• Initialization– ScanTool– Setting the IP Address with ScanTool• Logging in to the Web Interface• Factory Default Configuration2.1 Hardware OverviewProxim’s Tsunami QB-8100 Series (50 Mbps / 12 Mbps) products are full-featured outdoor QuickBridge Endpoints thatcontain a high power radio in a plastic enclosure with dual polarized, high gain performance, integrated antenna.These QuickBridge devices have an Ethernet port with auto-sensing 10/100 BASE-T with configurable Tx Modes and Speeds,and a serial port that can be used to configure the device using Command Line Interface. The device is powered through aPoE injector, and is equipped with bi-color LEDs on the Ethernet connector.Figure 2-1 Tsunami QB-8100 Series Device OverviewTsunami QB-8100 Series (50 Mbps / 12 Mbps) Installation and Management Guide 13