Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

System ManagementParameterDay Light Saving TimeCurrent Date/TimeDescriptionSpecifies the number of hours adjusted for Daylight Saving Time.Displays current date and time. If SNTP is not enabled, the current date and time areautomatically generated from the local system. If SNTP is enabled, it displays the time thedevice has got from the SNTP server.NOTES:• Provide the Primary and Secondary Server details only if the SNTP status is enabled.• For any reason, if the servers configured are not responding, the SNTP client retries every minute.5.5 Access ControlThe Management Access Control feature provides the option of controlling the management interfaces only from the specifiedhosts. The user needs to update the table with an IP address, which provides access to management interfaces, such as SNMP,HTTP, HTTPS, TELNET, and SSH.To view and configure the Access Table Status and Management Access Control Table, click MANAGEMENT > AccessControl.Figure 5-19 Management Access Control TableParameterAccess Table StatusIP AddressEntry StatusDescriptionEnable or disable the Management Access Control Table status. By default, it is disabled.Specifies the IP Address of the machine to which the management traffic needs to beallowed.Used to enable/disable a particular entry in the Management Access Table.To add a new IP Address, follow these steps1. Select Enable for the Access Table Status.2. Click Add to display the Management Access Table Add Row page.Tsunami QB-8100 Series (50 Mbps / 12 Mbps) Installation and Management Guide 125