Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)
Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)
Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
System ManagementFigure 5-20 Management Access Table Add Row3. Enter the IP Address of the device.4. Select Enable or Disable for the Entry status of the device.5. Click Add.Ensure that the IP address of the management PC that is used to manage the device is present in the table. Otherwise, youwill not be able to manage the device. If this case occurs, try to give the PC correct IP address for management; or else, thedevice can be configured via the CLI over the serial port.5.6 Reset to FactoryClick Reset to Factory to reset the device to its factory default state. This resets the network configuration values, includingthe password, IP address, and subnet mask.• Device will reboot automatically after clicking on the Reset To Factory Defaults. The device comes up with defaultconfigurations after reboot.Figure 5-21 Factory ResetTsunami <strong>QB</strong>-<strong>8100</strong> <strong>Series</strong> (<strong>50</strong> <strong>Mbps</strong> / <strong>12</strong> <strong>Mbps</strong>) Installation and Management Guide <strong>12</strong>6
Change language