Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

Advanced Configuration4. Click Add.FieldDescriptionProfile NameEncryption TypeEntry statusEnter the security profile name.Select an option from None or AES-CCM for the Encryption Type.1. None - If this option is selected, no encryption will be applied to the wireless link frames.2. AES-CCM - This option represents CCM Protocol with AES Cipher restricted to 128 bits.• Key 1: Enter 16 ASCII Characters or 32 Hex Digits.Select Enable/Disable to enable or disable the status of the security profile.Network Secret Enter the WORP Protocol Secret Key used for authenticating the End Point B with End Point A.NOTE: End Point A and End Point B must have same Network Secret.Sample Security Profile ConfigurationEnd Point AEnd Point BProfile Name NEW NEWEncryption Type AES-CCM AES-CCMKey 11234567890abcdef1234567890abcdef(32 Hexadecimal digits)orpublicpublic1234(16 ASCII Characters)1234567890abcdef1234567890abcdef(32 Hexadecimal digits)orpublicpublic1234(16 ASCII Characters)Network Secret public publicEntry status Enable Enable4.5.1.2 Modifying a Security ProfileTo edit the parameters of the existing security profiles,Figure 4-15 Wireless Security Edit RowTsunami QB-8100 Series (50 Mbps / 12 Mbps) Installation and Management Guide 57