Tsunami™ QB-8100 Series (50 Mbps / 12 Mbps)

Advanced Configuration4.6.2.3 QoS Class Configuration1. Click ADVANCED CONFIGURATION > QoS > Class List. Five predefined QoS Classes are displayed in this page.You can configure maximum 8 entries. QoS Class Name should be unique. This QoS Class can be referred in theDefault QoS Class or L2 Broadcast QoS Class. Any QoS Class referred cannot be deleted.Figure 4-37 QoS Class DetailsParameterDefault QoS ClassL2 Broadcast QoSClassDescriptionThis parameter specifies the QoS Class profile that needs to be associated with an EndPoint which is not listed in the QoS End Point List but connected.This parameter specifies WORP to use this particular class for worp broadcast facility.L2 Broadcast QoS Class is valid only for Downlink Direction. QoS Class assigned to thisprofile should have at least one Downlink SFC.4. Add a New QoS Class:a. Click Add to add new entry. The following screen appears for configuring the New Class Entry.Figure 4-38 QoS Class Add EntryTsunami QB-8100 Series (50 Mbps / 12 Mbps) Installation and Management Guide 76