TMPM330 - Keil

9.4.3 Control register
SC0CR
Under development
7 6 5 4 3 2 1 0
TMPM330 (rev 0.4) 9-28
TMPM330
bit Symbol RB8 EVEN PE OERR PERR FERR SCLKS IOC
Read/Write R R/W R (Cleared to “0” when read) R/W
After reset 0 0 0 0 0 0 0 0
Receive Parity Add parity 0: Normal operation 0: SCLK0 (For I/O
data bit 8
(For
1: Error
interfac
(For (For UART)
e)
Function
UART) UART)
0: Odd
1: Even
0:
Disabled
1: Enabled
Overrun Parity/
underrun
Framing
1: SCLK0 0: Baud
rate
generato
r
1: SCLK0
pin input
: 9 th bit of the received data in the 9 bits UART mode.
: Selects even or odd parity.
“0”: odd parity.
“1”: even parity.
The parity bit may be used only in the 7- or 8-bit UART mode.
: Controls enabling/ disabling parity.
The parity bit may be used only in the 7- or 8-bit UART mode.
:
:
:
Error flag (see note)
Indicate overrun error, parity error, underrun error and framing error.
: Selects edge for data transmission and reception.
“0”: Data transmit/receive at rising edges of SCLK0
“1”: Data transmit/receive at falling edges of SCLK0
: Selects input clock in the I/O interface mode.
“0”: baud rate generator
“1”: SCLK0 pin input.
(Note) Any error flag is cleared when read.
Serial Channel (SIO)