TMPM330 - Keil

Under development
8.2.1.1 TMRBn enable register (channels 0 through 9)
TBnEN
(0x4001_0xx0)
bit Symbol
TMRBn enable register (n=0~9)
31 30 29 28 27 26 25 24
Read/Write R R R R R R R R
After reset 0 0 0 0 0 0 0 0
bit Symbol
23 22 21 20 19 18 17 16
Read/Write R R R R R R R R
After reset 0 0 0 0 0 0 0 0
bit Symbol
15 14 13 12 11 10 9 8
Read/Write R R R R R R R R
After reset 0 0 0 0 0 0 0 0
7 6 5 4 3 2 1 0
bit Symbol TBnEN
Read/Write R/W R
After reset 0 0
Function
TMRBn
operation
0:
Disabled
1:
Enabled
“0” is read.
TMPM330 (rev 0.4)8-8
TMPM330
: Specifies the TMRB operation. When the operation is disabled, no clock is supplied to the other
registers in the TMRB module. This can reduce power consumption. (This disables reading
from and writing to the other registers.) To use the TMRB, enable the TMRB operation (set to
“1”) before programming each register in the TMRB module. If the TMRB operation is executed
and then disabled, the settings will be maintained in each register.
16-bit Timer/
Event Counters (TMRBs)