TMPM330 - Keil

Under development
8.2.1.5 TMRB flip-flop control register (channels 0 through 9)
TBnFFCR
(0x4001_0xx0)
bit Symbol
TMRBn flip-flop control register (n=0~9)
31 30 29 28 27 26 25 24
Read/Write R R R R R R R R
After reset 0 0 0 0 0 0 0 0
23 22 21 20 19 18 17 16
bit Symbol
Read/Write R R R R R R R R
After reset 0 0 0 0 0 0 0 0
15 14 13 12 11 10 9 8
bit Symbol
Read/Write R R R R R R R R
After reset 0 0 0 0 0 0 0 0
7 6 5 4 3 2 1 0
bit Symbol TBnC1T1 TBnC0T1 TBnE1T1 TBnE0T1 TBnFF0C1 TBnFF0C0
Read/Write R R/W R/W
After reset 1 1 0 0 0 0 1 1
“11” is read.
TBnFF0 reverse trigger
0: Disable trigger
1: Enable trigger
TBnFF0 control
00: Invert
01: Set
10: Clear
Function
When the When the When the When the 11: Don't care
up-counter
value is
up-counter
value is
up-counter
matches
up-counter
matches
* This is always read as
taken into
TBnCP1
taken into
TBnCP0
TBnRG1 TBnRG0 “11.”
:Controls the timer flip-flop.
“00”: Reverses the value of TBnFF0 (reverse by using software).
“01”: Sets TBnFF0 to “1”.
“10”: Clears TBnFF0 to “0”.
“11”:Don’t care
TMPM330 (rev 0.4)8-12
TMPM330
:Reverses the timer flip-flop when the up-counter matches the timer register 0,1 (TBnRG0,1).
:Reverses the timer flip-flop when the up-counter value is taken into the capture register 0,1
(TBnCP0,1).
16-bit Timer/
Event Counters (TMRBs)