NAVFAC P-300 Management of Transportation Equipment

a. Date Revoked Justification. Notations in the "Date Revoked" column of
NAVFAC 11260/3 should be initialed by the examiner. Supporting justification for this
action shall be kept in the equipment operator's license file.
b. Revoked License Return. When all equipment types are revoked, the
operator license (NAVFAC 11260/2) shall be returned to the license office without
delay.
3.14 Construction Equipment Operator License Jacket. All relevant forms and
supporting data shall be kept in the operator's license jacket. There shall be an
individual jacket kept for each applicant and operator. Each operator's license jacket
shall contain the following as a minimum:
a. Application for Construction Equipment Operator License, NAVFAC
11260/1 or equivalent.
b. Construction Equipment Operator License Record, NAVFAC 11260/3 or
equivalent.
c. Copy of Construction Equipment Operator License, NAVFAC 11260/2.
d. Certificate of Medical Examination CSC Standard Form 78 or equivalent
and any clinical tests.
e. Written test (graded and signed by examiner and dated).
f. Performance test (graded and signed by examiner and dated).
g. Training records pertinent to licensing.
3.15 Use of Government-Owned Transportation Equipment by Commercial
Contractors. DoD policy is for contractors to provide all necessary transportation
equipment needed for contract performance when an activity transportation function or
subfunction is to be contracted (service contract), or when an entire
Government-owned facility is to be contractor operated (GOCO). However, when
excess Government-owned equipment is available, and it is determined to be in the
best interest of the Government for the contractor to use the equipment, it will be
released to the contractor in an "as is" condition and used by the contractor for contract
performance. All equipment furnished to a contractor should be identified/listed in the
contract by registration number, type (description), and status code.
3.15.1 Equipment Replaced by the Government. Government furnished equipment
(GFE) provided to a contractor that will be replaced by the Government will be
assigned status code "E". An IO will be established to properly validate these
requirements.
3-38