NAVFAC P-300 Management of Transportation Equipment

Item Service Item Description
A B C
36 X X X Tires. Check for cuts, uneven wear, proper inflation
and sizes. Replace missing valve caps. Check for
matching tire size of duals, tandem bogies, and
multidrives (4x4s and 6x6s).
37 X X X Wheels. Check for rim damage and inspect for worn
and elongated stud holes. Retighten all lug nuts.
38 X X Crawler Track Assembly. Check plates, linkage, pins,
and bushings for wear. Check track shoe mounting.
Inspect and adjust track tension in accordance with
manufacturer's instructions.
39 X X X Sprockets. Check for tooth wear and alignment.
40 X X X Rollers. Check for oil leaks, broken flanges, flat
spots, and worn faces. Rollers should turn freely.
41 X X X Springs. Check for broken leaves or coils, loose Ubolts,
or shackles.
42 X X X Frame. Check cross members, slide rails, brackets,
welds, bolts, and rivets for condition and alignment.
43 X X X Engine Mounts. Inspect supports for looseness or
breaks.
44 X X X Cab. Check doors, windows, glass, seats, seat belts,
cushions, mirrors, body bolts, frames, sheet metal,
floors, paint and identification markings, and ensure
drain holes are not obstructed.
45 X X X Accident Damage. Inspect for accident damage,
loose or defective parts.
46 X X X Windshield Wipers. Check the windshield wipers for
condition and proper operation.
47 X X X Safety Guards. Check all safety guards and be sure
they are properly installed, secure, and in good
condition.
L-5