02.06.2013 Views

NAVFAC P-300 Management of Transportation Equipment

NAVFAC P-300 Management of Transportation Equipment

NAVFAC P-300 Management of Transportation Equipment

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

(4) Marking Colors. Painted and elastomeric film color numbers shall<br />

conform to FED-STD-595B. Reflective colors shall conform to ASTM D 4956. Marking<br />

colors shall be:<br />

(a) On vehicles or equipment painted yellow, use numerals and letters<br />

in reflective black, Type I, Class 1, No. 17038.<br />

(b) On vehicles painted white, individual letters and numbers shall be<br />

the reflective type, conforming to Type I, Class 3, Blue <strong>of</strong> ASTM D 4956.<br />

2.14.5 Special Markings for Aviation and Ground Fuel Servicing Vehicles. Special<br />

markings are required on fuel and oil servicing trucks and trailers to minimize the<br />

possibility <strong>of</strong> replenishing aircraft systems with an improper grade <strong>of</strong> fuel or oil.<br />

Precautionary markings are also required to provide sufficient warnings regarding the<br />

content <strong>of</strong> these vehicles. Type IV, Class 1 wide-angle prismatic reflective markings as<br />

outlined in ASTM D 4956 will be used. Markings will be 6-inch reflective red alphanumeric<br />

characters on an 8-inch prismatic reflective white background. Except as noted<br />

(paragraph 2.14.5.e.), painted markings, in lieu <strong>of</strong> reflective markings, are not<br />

authorized.<br />

a. Flammable. Apply the word "FLAMMABLE", using 6-inch red reflective<br />

letters on an 8-inch white prismatic reflective background, to the front, rear and each<br />

side <strong>of</strong> the vehicle tank/semitrailer.<br />

b. No Smoking Warning. Apply the words, "NO SMOKING WITHIN 50 FEET",<br />

using 6-inch red reflective letters on an 8-inch white prismatic reflective background to<br />

each side and the rear <strong>of</strong> the vehicle tank/semitrailer.<br />

c. Product Identification. Vehicle tanks/semitrailers shall be marked on each<br />

side and the rear with product designations. In addition, refuelers used to issue<br />

approved NATO aviation fuels will be marked with the NATO symbol for the product<br />

being dispensed. NATO symbols will be centered below each product designation (rear<br />

and sides). All lettering will be in 6-inch red reflective letters imposed on an 8-inch white<br />

prismatic reflective background. Product designation markings and NATO symbols shall<br />

be as follows.<br />

Product Marking NATO Symbol<br />

Aviation gasoline,<br />

Grade 100/130 Octane AVGAS 100/130 F-18<br />

Grade 115/145 Octane AVGAS 115/145 F-22<br />

Jet fuel, Grade JP-4 Jet Fuel JP-4 F-40<br />

Jet fuel, Grade JP-5 Jet Fuel JP-5 F-44<br />

Jet Fuel, Grade JP-8 Jet Fuel JP-8 F-34<br />

2-54

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!