NAVFAC P-300 Management of Transportation Equipment

ACTIVITY NAME UIC PRIORITY
TEMC: CLAIMANT UIC
CRANE REQUIREMENTS DATA SHEET
PRIORITY
Crane operations vary widely from one activity to another. The factors listed below are required to determine the size and type of equipment to
best meet the specific operating requirements. Since mobile cranes generally perform varied operations, the data provided should reflect the
operating requirements of the primary operation of the crane. Secondary operations should be considered and data provided, when those
conditions exceed in capacity, working radius, or other limiting factors, those of the primary operation.
I. Narrative Description of Primary Operation . Describe in detail the entire operation, giving all pertinent information :
II. PRIMARY LIFTING REQUIREMENTS
1. Description of load (i.e., air conditioner, transformer, small boats, etc.).
a. Size: Height Ft. Length Ft. Width Ft.
b. Weight: pounds.
c. Special or peculiar handling information (i.e., strong-back, equalizer
beam, spreader bar, etc.).
d. Identify aircraft, boats, etc., by model/type.
e. Maximum weight: pounds at minimum radius of
2. Maximum required radius
3. Height or depth of load placement
top of roof, down in dry dock or on water etc.).
4. Sling height or special rigging dimensions.
5. Height, length, or width restrictions on crane.
feet with load of pounds.
(i.e., on
6. Axle load (lbs.) or wheel/outrigger bearing pacity ca (psf) limitations.
(Design capacities of piers, bridges, utility tunnels, roads, etc.)
Figure H-3
H-3
feet.