NAVFAC P-300 Management of Transportation Equipment

APPENDIX K. NAVAL CONSTRUCTION FORCE (NCF)
AUTOMOTIVE EQUIPMENT INSPECTION GUIDE
Item Service Item Description
A B C
1 X X Valve Mechanism. Adjust valves as the need for
service is indicated by valve noises or engine
performance.
2 X X Ignition System. Check condition of distributor cap
and rotor. Check timing and distributor spark
advance.
3 X X Spark Plugs. Clean and gap spark plugs. Replace
as required.
4 X X X Fuel System. Check fuel filter and fuel pump screens
and bowls. Clean or replace as required. Adjust idle
speed and fuel mixture as required.
5 X X X Choke and Throttle Controls. Check the choke,
throttle linkage, engine shut-off and emergency shutoff
for proper operation. Lubricate as required.
6 X X Governor. Inspect all linkage and pins for wear and
the operating efficiency of the governor under varying
load conditions. Notice signs of surging or improper
operation. Lubricate as required. Using tachometer,
check engine governed speed.
7 X X X Fuel Tank and Shut-Off Valves. Inspect fuel tanks for
condition of mounting brackets, plugged air vents,
and fuel lines for leaks or chafing. Check shut-off
valve for proper operation.
8 X X X Lights. Inspect all lights, signals, and reflectors.
Check condition of trailer jumper cables and junction
boxes on truck-tractors. Visually check headlight
alignment.
9 X X X Battery. Check water level. Clean battery, terminal
connections, remove battery and clean box, check
hold-down bolts and brackets.
K-1