Technical Manual TNC 360 - heidenhain - DR. JOHANNES ...

Machine Function and input Reaction /
parameter
CN 123
MP1390 Control with lag or feed forward control
Input range: 0 or 1
1 = operation with lag
0 = operation with feed forward control
3.3 Operation with feed forward control
Machine Function and input Reaction /
parameter
CN 123
MP1410 Position monitoring in operation with feed forward
(cancelable)
Input value: 0.001 to 30 [mm]
MP1420 Position monitoring in operation with feed forward
(EMERGENCY STOP)
Input value: 0.001 to 30 [mm]
MP1510.0 kv factor for feed forward control
to
MP1510.3
Input value: 0.1 to 10 [m/min/mm]
MP1520 Position approach speed
Input value: 0.1 to 10 [m/min]
MP1530 Damping factor for transient response
Input value: 0.01 to 0.999
3.4 Operation with servo lag
Machine Function and input Reaction /
parameter
CN 123
MP1710 Position monitoring for operation with lag
(cancelable)
Input value: 0.001 to 1000 [mm]
MP1720 Position monitoring for operation with lag
(EMERGENCY STOP)
Input value: 0.001 to 1000 [mm]
MP1810.0 kv factor for operation with lag
to
MP1810.3
Input range: 0.1 to10 [m/min/mm]
MP1820 Multiplication factor for the kv factor
Input value: 0.001 to 1
MP1830 Kink point
Input value: 0 to 100 [%]
Page
5-10 TNC 360 3 List of Machine Parameters 4/96
4-52
Page
4-70
4-70
4-62
4-62
4-62
Page
4-69
4-69
4-56
4-58
4-58