Technical Manual TNC 360 - heidenhain - DR. JOHANNES ...

Word execution with the OR NOT command
Operands: B, W, D, K
Operation:
The contents of the Word Accumulator and the contents of the operand (B, W, D, K) are gated with
OR NOT. In accordance with the different sizes of operand (B = 8 bit; W = 16 bit; D = K = 32 bit), 8,
16 or 32 bits will be influenced in the Accumulator.
Thus: Bit 0 in the Accumulator is gated with bit 0 in the operand
Bit 1 in the Accumulator is gated with bit 1 in the operand and so on.
The result of the operation is stored in the Word Accumulator.
Example:
The contents of Word W4 and Word W6 are to be gated with OR NOT and the result assigned to
Word W8.
Initial state: Word W4 = 36 AA (hex)
Word W6 = 3C 36 (hex)
Word W8 = ?
Line Instruction Accumulator Contents Operand Contents
Bit 31 . . . 15 7 0 15 8 7 0
... x x x x x x x x x x x x x x x x x x
1 L W6 ... 0 0 0 0 1 1 1 1 0 0 0 0 1 1 0 1 1 0 00111100 00110110
2 ON W4 ... 1 1 1 1 1 1 1 1 0 1 0 1 1 1 0 1 1 1 00110110 10101010
3 = W8 ... 1 1 1 1 1 1 1 1 0 1 0 1 1 1 0 1 1 1 11111101 01110111
Line 1: The contents of Word W6 are loaded into the Accumulator.
Line 2: The contents of the Word Accumulator and Word W4 are gated with OR NOT.
Line 3: The gating result is assigned to Word W8.
8/95 TNC 360 3 Commands 7-51