Scan Tool Operating Instructions - AK Automotive Training

Table 8
Table 9
Manufacturer Applications
Relevance when '1' is displayed in the 8 digit block
X X X X X X X X Adjustment Conditions
Display Group 1
Engine Code: ABK
Display Description
Group
1 1. Engine speed (idling).
2. Coolant temperature.
3. Lambda probe voltage (fluctuates).
4. Setting condition (see Table 10 for the relevance of the figures in line 4).
97
Engine Operating
Conditions Display
Group 4
1 Not relevant Overrun
1 Signal from automatic
gearbox
Idling
1 Air conditioner
compressor switched
on
Part load
1 Idling switch on Full load
1 Fault in the Lambda
control
Not relevant
1 Throttle valve open Not relevant
1 Engine running Not relevant
1 Coolant temperature
below 80°C
Not relevant
Relevance when 1 is displayed in the 8 digit block
X X X X X X X Lambda Control
Operating condition -
Display Group 5
Throttle Valve Control
Operating Condition -
Display Group 7
1 Coding for synchro Mechanical emergency
running
1 Not relevant Not relevant
1 Not relevant Adaption necessary
1 Lambda control at limit Adaption necessary
1 Diagnostic fault Not relevant
1 Lambda probe
operationally ready
1 Rich mixture (0= lean
mixture)
Adaption terminated
(battery voltage too low)
Idle switch open