Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Table 13 - Gearshift Inputs
Display Group 4 - Gearshift Input State - Line 4
X X X X X 4 - Digit Code (ECM 5 - Digit Code (ECM
Suffix C)
Suffix E)
0 Always = 0 Always = 0
0 Aircon compressor (0 = Aircon compressor (0 =
off, 1 = on).
off, 1 = on).
1 Mechanical Idling switch Mechanical Idling switch
(1 = closed, 0 = open). (1 = closed, 0 = open).
1 Always = 1 (except for Always = 1 (except for
auto gearbox with gear auto gearbox with gear
engaged which = 0). engaged which = 0).
0 - Auto gearbox engine
intervention (0 = not
active, 1 = active).
Table 14 - Lambda Programming Range
X X X X Display Groups 7 & 8 - Line 2
0 Part load 3
0 Part load 2
0 Part load 1
1 Idling speed
NOTE: Read-out 0 = engine speed or speed and load for this particular learning range
not yet reached.
Read-out 1 = engine speed or speed and load for this particular learning range has
been reached.
For Idling speed state, engine is to idle between 650 and 900 rpm.
For part-load programming ranges, a second person will be needed to perform a road
test whilst the operator observes the display. During the road test, raise the engine
speed to between 1500 and 3000 rpm and produce a load by slightly depressing the
brake.
107