Scan Tool Operating Instructions - AK Automotive Training

Land Rover
Control Module ID
Selecting this option displays the module version information.
Maintenance
Manufacturer Applications
Selecting 'Maintenance' allows the resetting of the adaptations to factory settings for
the components listed in the menu. It is recommended that the adaptations be reset
to factory settings as opposed to the `learned' settings once the components have
been replaced.
Learn Security
This option allows the control module to learn a new security value input by the user.
Tune
Ensure all electrical loads are off, select 'Tune' and follow the instructions on the
OmiCheck. The OmiCheck will now take you through the tune.
Programming
This option prompts for a vehicle type to be selected then offers a programming menu
for that type of vehicle. The programming option allows a new ABS ECU to be set up
on that vehicle.
Immobilisation
Follow the on-screen instructions to perform a security check and if security is
supported, program the alarm immobilisation.
Bleeding
Selecting this option allows brake bleeding on the vehicle, full on-screen instructions
are provided.
Firstly, a modulator bleed is performed in the order: Left Front, Right Front, Right
Rear, Left Rear. The operator is instructed to press and hold the brake pedal
throughout the modulator bleeding procedure. The procedure can be repeated as
many times as required. Upon completion, the operator is instructed to release the
brake pedal.
Secondly, a power bleed is performed in the order Left Front, Right Front, Right Rear,
Left Rear. The operator can start and stop the pump using the up and down arrows
with the OmiCheck as instructed. Use the tick key to move on to the next wheel. Once
completed, an instruction will appear informing the operator that the procedure is
complete.
237