Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Table 16- Operating State
Relevant when '1' is displayed in the 3 - digit block
X X X Display Group 2
1 Air conditioner demands higher capacity -
switch off air conditioner.
1 Idling speed switch closed.
1 Air conditioner compressor switched on.
Table 17 - Brake Pedal Status Monitoring
Relevant when '1' is displayed in the 3 - digit block
X X X Display Group 6
1 Clutch pedal switch (F36) - open
1 Brake pedal switch (F47) - open
1 Brake light switch - closed
Table 18 - Cruise Control System (CCS) Switch Status
Relevant when '1' is displayed in the 6 - digit block
X X X X X X Display Group 6 - line 3
1 Clutch pedal switch (F36) -
open
1 Brake light switch - closed
1 Speed resumption/
acceleration
1 Speed reduction
1 CSS off, with speed stored
1 CSS switched on
Engine Codes: ADP, ADR and AEB
Display Description
Group
1 1. Engine speed (read-out in steps).
2. Engine load - injection time per revolution - 1.6 to 2.4 ms (ADP
engine code), 1.0 to 2.5 ms (ADR engine code), 0.5 to 1.5 ms (AEB
engine code).
3. Throttle valve angle.
4. Ignition angle.
111