Scan Tool Operating Instructions - AK Automotive Training

FastCheck
• Drive off. The Reset will terminate without informing the driver of success. If the
Reset has not been carried out correctly however the RPA Warning Lamp will glow
red and the process must be repeated.
• If the vehicle is stopped while the reset is occurring the reset will be interrupted and
will be resumed when the vehicle is driven again.
For BMW X3 (E53), BMW X5 (E83):
• Start the engine but do NOT start driving.
• Hold down the button (shown in the diagram below) for approximately 5 seconds,
or until the RPA Warning Lamp glows yellow.
OM1345
• The Warning Lamp should stay yellow for 5 seconds to indicate that the Reset has
started.
• Drive off. The Reset will terminate without informing the driver of success. If the
Reset has not been carried out correctly however the RPA Warning Lamp will glow
red and the process must be repeated.
• If the vehicle is stopped while the reset is occurring the reset will be interrupted and
will be resumed when the vehicle is driven again.
74