Scan Tool Operating Instructions - AK Automotive Training

TPMS (Tyre Pressure Monitoring System)
69
FastCheck
The TPMS (Tyre Pressure Monitoring System) function can be used to re-program
tyre valves on vehicles fitted with Schrader TPMS valves, refer to the coverage in the
table below:
Manufacturer Vehicle - Type 1 Vehicle - Type 2
Citroen
C5
C8
C4
C5 II
C6
Peugeot
607
807
307 II
407
607 II
Fiat Ulysse
Lancia Phedra
Renault
Laguna II
Espace IV
Vel Statis
Megane II
Scenic II
Citroen, Peugeot, Fiat and Lancia (Type 1)
For Citroen, Peugeot, Fiat and Lancia, the only option is to program all valves using
the following procedure:
1. When requested excite each TPMS valve in turn starting with the front left wheel,
front right wheel, rear right then rear left wheel. In order to excite the valves, an
exciter such as the Omitec OmiDetect tool should be used. When excited, the
valve is forced to transmit its valve code and status to the vehicle’s body control
module.
2. When the body control module receives the transmission, it stores the tyre valve
code for the current wheel which is also indicated by the OmiCheck.
3. When each valve code has been programmed, the OmiCheck will show a
confirmation message will appear at which point you can confirm programming
or abort.