Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Table 44 - Idling Speed Operating Conditions
Relevant when '1' is displayed in the 3-digit block
X X X Display group 2 - Line 3
1 A/C compressor switched on
1 Idling switch closed
1 Idle speed increased due to A/C
Table 45 - Group 6 Brake Pedal Monitoring
Relevant when '1' is displayed in the 3-digit block
X X X Display group 6 - Line 2
1 Brake light switch closed
1 Brake pedal switch open
1 Clutch pedal switch open
Table 46 - Group 6 Cruise Control System Monitoring
Relevant when '1' is displayed in the 5-digit blocks
X X X X X Display group 6 - Line 3
1 CCS switched on
1 Speed accepted
1 Speed accepted again
1 Brake pedal depressed
1 Clutch pedal depressed
Table 47 - Group 16 Additional Heater Condition
Relevant when '1' is displayed in the 8-digit blocks
X X X X X X X X Display group 16 - Line 2
1 Coolant temperature above 70 to 80°C, or intake
air temperature above 5°C
1 Alternator defective
1 Battery voltage below 9V
1 Engine speed below 760 rpm
1 Engine start within the last 10 secs
1 Coolant or Intake manifold temperature sensor
defective
1 Not assigned
1 Not assigned
156