Scan Tool Operating Instructions - AK Automotive Training

Inflation
Manufacturer Applications
When work has been completed on the specified area the air suspension can be
re-inflated either by selecting the corresponding ‘Inflation’ routine or by starting the
engine. When the engine is running, the system will inflate the four corners to the
correct height for the currently selected level.
Inflation Routines
There are seven routines available for this system.
• Inflate right front
• Inflate left front
• Inflate right rear
• Inflate left rear
• Inflate front
• Inflate rear
• Inflate all
These routines are to be used either when work has been completed on a section of
the air suspension system or to try and level the vehicle in an emergency repair
situation.
NOTE: The vehicle will raise during inflation of the air suspension. To avoid damage,
ensure all doors are closed.
Pre-test conditions
• The ignition must be ON.
• An approved battery charger must be connected to ensure consistent power
supply.
NOTE: These routines may need to be repeated more than once to completely inflate
the specified area.
243