Scan Tool Operating Instructions - AK Automotive Training

57
FastCheck
The following table displays possible service options together with the control module
used to reset each option.
Service Option Control Module
Engine oil Engine (DME/DDE)
Particulate filter Engine (DDE)
Diesel additive Engine (DDE) Engine (DDE)
Front brake pads Dynamic stability control (DSC)
Rear brake pads Dynamic stability control (DSC)
Micro filter Climate control (IHKA)
Brake fluid Instrument cluster (INSTR)
Coolant Instrument cluster (INSTR)
Spark plugs Instrument cluster (INSTR)
Vehicle check Instrument cluster (INSTR)
Statutory vehicle inspection Instrument cluster (INSTR)
Statutory exhaust emission inspection Instrument cluster (INSTR)
The OmiCheck will automatically identify all control modules required during the reset
process. If an unknown control module is found or communications cannot be
established, the operator is prompted to either to continue or abort.
NOTE: If the process is continued service options applicable to the unknown control
module will not be available (see service option table).
The current date and time information will be displayed by the OmiCheck. Press the
key if the information is correct and continue or press
information.
key to correct the
NOTE: If date and time used during the reset process is incorrect, this will result in
incorrect service intervals.
To change the date and time:
Use the
‘/ \’.
and keys to change the value of the selected information indicated by
Use the key to change the selected date/time field.
Use the key to complete the information entry.
The screen will display a final confirmation of the new data entered. Press the
to program the new information to the vehicle.
key
Pressing the key at any point during the date and time change to will return to the
initial date and time confirmation screen. No information will have been changed.
The service options available on the vehicle are displayed as a list. Each option is
displayed with the service data:
The percentage reset value.