Scan Tool Operating Instructions - AK Automotive Training

FastCheck
Corsa D
The number of miles until the next service can be selected by the user, 9000 miles or
18000 miles can be selected. The number of days until the next service is always set
at 364 days (1 year).
Astra-H / Zafira-B
The number of miles until the next service and number of days until the next service
are calculated by the OmiCheck depending on the operators selections of the
following:
1. Country - The miles and days until next service are set to values pre-determined
by GM, depending on the Country the vehicle is being used in.
The operator must first select the Continent and then the Country.
For core European Countries (UK, Ireland, France, Belgium, Germany, Spain,
Italy, Portugal, Holland, Austria etc.) select ‘Other European Countries’.
2. ECO Service, ECO Service Flex - For most core European countries the
Operator can set the vehicle to either ‘ECO Service’ (the standard GM service
plan which used standard GM values for miles and days until next service) or
‘ECO Service Flex’ (the values for miles and days until next service are
dynamically set by the vehicle’s onboard computers, which monitor how the
vehicle is being driven and set the Service Intervals accordingly).
For ECO Service Flex Petrol vehicles the OmiCheck will program the vehicle with
the maximum number of miles allowed by the Flex system (22000 miles) and the
maximum number of days allowed (728, or 2 years).
For ECO Service Flex Diesel vehicles the OmiCheck will program the vehicle
with the maximum number of miles allowed by the Flex system (31000 miles) and
the maximum number of days allowed (728, or 2 years).
These are default values which ensure that the Service Indicator will come on in
either 22000 or 31000 miles or 2 years, whichever occurs first, if the ECO Service
Flex system fails for any reason.
Vectra-C / Signum
Only a straight reset is available on these vehicles. The programmed Service Interval
values of miles and days until the next service cannot be altered.
NOTE: The Engine Oil used on these vehicles is ‘Long-life Oil’. When the Engine Oil
is changed the Technician must use the ‘Long-life Oil’ reset option on the OmiCheck
(see below) to reset the Engine Control Module. The Technician must then select
‘Service’ again to restart the Service Interval Reset.
CAUTION: It is important to depress, and release, the brake pedal when prompted by
the OmiCheck during the Reset procedure. If this is not done correctly the Reset will
not be successful.
62