Scan Tool Operating Instructions - AK Automotive Training

61
FastCheck
Ford vehicles
Oil Degradation Counter Reset
This option is necessary on vehicles which have Diesel Particulate Filters (DPF)
fitted. This is not necessary on vehicles with petrol or LPG engines or diesel engines
if DPF is not fitted. The counter should only be reset AFTER the oil has been
changed.
GM Vehicles
Service Interval Reset
CAN Vehicles - (Astra-H, Corsa-D, Signum, Vectra-C and Zafira-B)
This function should be used after a vehicle has been serviced.
The vehicle is programmed with the number of miles and days until the next service
and the Service Indicator light is turned off.
The Service Indicator will come on again when either the number of programmed
miles is reached or the number of programmed days is reached, whichever occurs
first.
The reset is started by selecting the 'Service’ option.
To return to a previous menu, press the key.
The OmiCheck will communicate with the Instrument pack to determine the vehicle
model. If the vehicle model is unknown the operator must manually select the vehicle.
NOTE: Vehicle must NOT be moving during this procedure and all doors must be
closed. The OmiCheck will check the vehicle speed to ensure that the vehicle is not
moving before starting the procedure.
Security Code
To perform the reset the operator must enter a 4-digit security code into the
OmiCheck. This code will be programmed into the vehicle to allow a Reset to be
performed.
The 4-digit security code is found in the owner’s handbook on a card with the other
important codes and numbers for the vehicle (such as the VIN number and Radio
code etc.).