Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
54 Idling
Control
55 Speed
Regulation
56 Speed
Regulation
60 Electronic
Throttle
System
62 Electronic
Throttle
System
62 Electronic
Throttle
System
kick-down
adaption
66 Cruise
Control
System
(CCS)
70 EVAP
System (code
ANB)
77 Secondary
Air Injection
System (code
ANB)
1. Engine speed.
2. Operating mode (idle, part load, etc.).
3. Accelerator pedal position (sensor 1).
4. Throttle valve angle (sensor 1).
1. Engine speed.
2. Idling regulator.
3. Idling regulator learnt value.
4. Operating condition (for the relevance of this display line, see Table
62).
1. Actual engine speed.
2. Specified engine speed.
3. Idling regulator.
4. Operating mode (for the relevance of this display line, see Table
63).
1. Throttle valve angle (sensor 1).
2. Throttle valve angle (sensor 2).
3. Learning step counter.
4. Adaptation condition.
1. Throttle valve angle (sensor 1).
2. Throttle valve angle (sensor 2).
3. Accelerator pedal position (sensor 1)
4. Accelerator pedal position (sensor 2).
1. Throttle valve angle (sensor 1).
2. Throttle valve angle (sensor 2).
3. Accelerator pedal position.
4.
1. Actual vehicle speed.
2. Brake, clutch and CCS switch positions (for the relevance of this
display line, see Table 64).
3. Specified vehicle speed (last value stored by CCS).
4. Position of CCS controls switch (for the relevance of this display
line, see Table 65).
1. EVAP canister purge valve duty cycle.
2. Lambda regulation deviation during tank vent valve diagnosis.
3. Not allocated
4. Result of test.
1. Engine speed.
2. Engine coolant temperature.
3. Secondary air injection air mass
4. Result of test.
170