Scan Tool Operating Instructions - AK Automotive Training

FastCheck
Annual Distance:
The average annual distance travelled is required for the calculation of various
Condition Based Service (CBS) functions.
The annual distance is based on the distance travelled after approximately six to eight
weeks from being reset. It is advised to reset the annual distance after any changes
in the driving pattern of the vehicle.
NOTE: Incorrect annual distance will affect the CBS intervals.
The value will be set to a default (approximately 30,000 km / 18,640 miles) until the
new value has been calculated.
Applicable vehicles:
BMW 1 series (E81/E87)
BMW 3 series (E90/E91/E92/E93)
BMW 5 series (E60/E61)
BMW 6 series (E63/E64)
BMW 7 series (E65)
BMW X5 (E70)
BMW X6 (E71)
Battery Change:
After fitting a new battery, the battery change function should be run. The battery
change function registers the replacement of a battery with the power management
system. Failure to do so may cause the power management system to operate
incorrectly.
The battery change application determines the required battery capacity and type
from the Car Access System (CAS) module. The replacement battery must be same
capacity and type as displayed.
NOTE: Certain vehicles require the use of an Absorbent Glass Mat (AGM) battery.
Applicable vehicles:
BMW 1 series (E81/E87)
BMW 3 series (E90/E91/E92/E93)
BMW 5 series (E60/E61)
BMW 6 series (E63/E64)
BMW 7 series (E65)
BMW X5 (E70)
BMW X6 (E71)
60