Scan Tool Operating Instructions - AK Automotive Training

55
FastCheck
and press [MODE] to exit the functions menu.
6. Plug the OmiCheck into the Diagnostic Socket and perform a Service Reset by
selecting Service, Alfa Romeo, Mannesman then Service Reset.
7. Disconnect the OmiCheck, leaving the ignition on.
8. Press the [MODE] button on the dashboard to enter the dashboard functions
menu.
9. Use the [+] and [-] buttons on the dashboard to navigate to the UNITS option and
press [MODE] to select.
10. Use the [MODE], [+] and [-] buttons to set the units back to Miles. All other
settings should be left unchanged.
11. Use the [+] and [-] buttons on the dashboard to navigate to the SERVICE option
and press [MODE] to select.
12. ‘Number of Miles to Service’ should now read approximately 12500 miles.
13. Use the [+] and [-] buttons on the dashboard to navigate to the END MENU option
and press [MODE] to exit the functions menu.
14. Switch Ignition OFF.
This procedure is necessary to ensure that the value read from the Odometer by the
dashboard, when a Service Reset is performed by the OmiCheck, is in Kilometres.
The Dashboard can then calculate the ‘Number of Miles to Service’ correctly.
On the European Continent this procedure is not necessary as all dashboards are in
Kilometres.
BMW Vehicles
NOTE: To switch the ignition ON procedure for vehicles fitted with a start/stop, insert
the remote key-fob fully into the ignition slot then press the start/stop button once
(without any foot pedals depressed).
Manufacturer Option 1 Option 2
BMW CBS Service Options
Digital Reset Oil Reset
Distance Reset
Time Reset
Analogue Reset Oil
Inspection Service
Use the and keys to select the required menu option and press to confirm the
selection. To return to a previous menu, press the key.
The screen will display the message “BMW Reset” to confirm the reset process was
completed successfully.