Scan Tool Operating Instructions - AK Automotive Training

FastCheck
Variable Service Reset (VAG)
For some VAG (Audi and VW) vehicles manufactured since 2000, the variable service
reset option must be used. Refer to the Vehicle Application List.
WARNING: Changing the baseline / learn values of any channel could have
adverse effects on engine performance and running. If you have any doubt
please consult somebody familiar with the system.
Service
Type
Service Service
Reset
Adaptation Channel Counter Contents Value to
Reset
2 Reset service counters
(distance and time)
00000
40 Distance travelled since last
service ÷ 100.
00000
41 Time elapsed (in days) since
last service
00000
42 Lower limit for distance to
next inspection
-----
43 Upper limit for distance to
next inspection
-----
44 Upper limit for time to next
inspection
-----
45 Quality of engine oil -----
To reset the service interval, use the
to confirm the selection.
and keys to select channel 2 and press
Change the value of the channel to 00000 to reset the both the time and distance
service counters. Use the
confirm.
and keys to change each digit to 0 and press to
NOTE: Channels 40, 41, 42, 43, 44 and 45 are used when installing a new instrument
pack.Values from the original instrument pack must be entered into the new
instrument pack to ensure that vehicle servicing is carried out at the correct intervals.
68