Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Table 31 - Throttle Control Learning Requirements
Relevant when '1' is displayed in the 6-digit block
X X X X X X Display group 23 - Line 1
1 Throttle valve positioner Min.
stop signal - learning process
(0=Learning process OK,
1=Learning process required)
1 Throttle valve positioner Max.
stop signal - learning process
(0=Learning process OK,
1=Learning process required)
1 Learning process throttle
valve potentiometer Min. stop
(0=Learning process OK,
1=Learning process required)
1 Learning process throttle
valve potentiometer Max. stop
(0=Learning process OK,
1=Learning process required)
1 Not assigned
1 Throttle valve potentiometer
being balanced with throttle
valve positioner (0=Balance
required, 1=Balance OK)
Table 32 - Intake Manifold/Camshaft Adjustment Operating Mode
Relevant when '1' is displayed in the 3-digit block
X X X Display group 25 - Line 3
1 1= Camshaft advanced
1 1= Long intake manifold track
0 Not assigned
Engine Codes: 1Z (03.94-on), AEY, AFN, ALE, AVG
Display Group Description
1 Injected 1. Engine speed.
Quantity 2. Injected quantity.
3. Modulating piston movement sensor voltage.
4. Engine coolant temperature.
2 Idling Speed 1. Engine speed.
2. Accelerator pedal position.
3. Operating condition (for the relevance of this data see Table 33).
4. Engine coolant temperature.
145