Scan Tool Operating Instructions - AK Automotive Training

Manufacturer Applications
Table 12 - Setting Conditions Table
Relevance when '1' or '0' is displayed in the 8 digit block
X X X X X X X X Operating State - Operating state Display
Display Group 1 4
1 Idling contact closed -
1 AC compressor on Acceleration
enrichment/lean
mixture on deceleration
1 Air conditioner on Full load
0 Torque reduction
(gearshift intervention
in auto gearbox)
-
1 - Idling contact closed
1 Driving stage
(automatic gearbox)
Overrun cut-off
Engine Code: ABC
Display Description
Group
1 1. Engine speed.
2. Intake manifold pressure (100% = 1022 hPa, 32% = 327 hPa).
3. Not relevant
4. Idling stabilisation position (18 to 75 steps at idle).
2 1. Throttle valve angle.
2. Not relevant.
3. Coolant temperature.
4. Intake air temperature.
3 1. Lambda learning factor (cylinders 1 to 3, 0.84 to 1.12).
2. Not relevant.
3. Lambda control factor (cylinders 1 to 3, 0.84 to 1.2).
4. Not relevant.
4 1. Not relevant.
2. Not relevant.
3. Lambda control factor (cylinders 1 to 3).
4. Not relevant.
5 1. Engine speed.
2. Knock control depth (base read-out = 60°).
3. Not relevant.
4. Coolant temperature.
6 1. Idling stabilisation position.
2. Idling stabilisation learning value.
3. Idling stabilisation disturbance influence.
4. Not relevant.
101